Translations:Conveyor Automation/4/en

From Mikrodev Documentation
Jump to navigation Jump to search

Diagram Solution[edit source]

conveyor_automation.png

  • The system on-off function was implemented using the pulse relay. When the system is off, the system will be turned on when a high level signal is received from the Start / Stop button, and the system will shut down when a high level signal is received while the system is on.
  • When the system is first turned on, motor1 will start to operate with the label 'System Start / stop' pulse relay.
  • When the FS1 sensor activates, it will wait for 2 seconds and then work. For this algorithm, the FS1 tag was checked with an on delay.
  • When the FS2 sensor is activated, motor 3 will start after waiting for 3 seconds with delay.