PLCRESET and GSMRESET Definition

From Mikrodev Documentation
Jump to navigation Jump to search

RESET DEFINITION VIA MOBILE PHONE[edit | edit source]

To use AT commands from mobile, the blocks must be installed as follows.

reset1.png

reset2.png

reset3.png

AT+PLCRESET=? and AT+GSMRESET=? When the command is sent, the information stored in the device is sent by the PLC as sms.

reset4.png

When AT+PLCRESET=26400 and AT+GSMRESET=600 command is sent, the specified number is set to the PLC in seconds.

reset5.png

Repeat AT+PLCRESET=? and AT+GSMRESET=? When the command is sent, it is seen that the set value is processed to PLC.

reset6.png

RESET DEFINITION VIA MICROTERMINAL[edit | edit source]

AT+PLCRESET=? When the command is queried from the command section, PLCRESET value is displayed.

reset7.png

When AT+PLCRESET=26400 command is sent, the specified number is set to the PLC in seconds.

reset8.png

The same operations are done in GSMRESET.

reset9_1.png.jpg

reset9_2.jpg

Repeat AT+PLCRESET =? and AT+GSMRESET =? When the command is sent, it is seen that the set value is processed to PLC.

reset10.png